Specs Table

[table]
Z30 / 20 N RJ, , , ,
Product, Power, Drive, Platform Height, Working Height
Boom Lift, Electric, Self-propelled, 29.2 ft., 35 ft. 2 in.
[/table]
The Genie Z-30/20N RJ comes with a self-leveling platform that measures 2 feet 6 inches and 3 feet 11 inches in length and width respectively. One can work with ease in small environment with its working height of 35 feet 2 inches, horizontal reach of 20 feet 6 inches, and overall width of 3 feet 11 inches. Wheels measuring 22x7x17.75 inches and wheel base of 5 feet 3 inches help in improved transportation. This man lift is drive enabled with SepEx drive system of 35 percent gradeability, which helps in driving on slopes and terrain areas.

It has features for additional safety such as tilt, descent, and travel alarms. Featuring unique hydraulic platform rotation and a large lift capacity of up to 500 lb. the Genie Z-30/20N RJ has all the traits for usage in rugged outdoors. It is powered by 48 V DC of eight 6 V batteries with 350 Ah capacity.

[table]
Z34 / 22 Bi-Energy, , , ,
Product, Power, Drive, Platform Height, Working Height
Boom Lift, Electric / Diesel, Self-propelled, 34.5 ft., 40 ft. 6 In.
[/table]
The Genie Z-34/22 Bi Energy Boom is ideal for both indoor and outdoor applications. This system offers quiet, pollution-free operation. It works with the Sep-Ex 48V DC drive system as well as an on-board diesel powered generator. Even when the batteries are fully discharged, this generator delivers enough electrical power to run all the boom functions. With the Sep-Ex drive motors and controller, the boom delivers automatic hill braking and ramp braking.

The Genie Z-34/22 Bi Energy Boom offers 4.0 mph travel speed and 30% gradeability. There are no speed sensors or forward/reverse contactors in this boom. The Sep-Ex motor controller takes care of speed and facilitates easy reversing. The 48V drive system offers prolonged battery life, while an on-board 25 amp AC charger takes care of overnight charging. The Bi Energy Boom has various tire options such as industrial air-filled, industrial foam-filled, industrial non-marking air filled, industrial non-marking foam filled, and sealant treated air-filled.

[table]
Z45 / 25 RT, , , ,
Product, Power, Drive, Platform Height, Working Height
Boom Lift, Electric / Diesel / Gas, Self-propelled / Rough Terrain, 45.9 ft., 51 ft. 11 In.
[/table]
The Genie Z45/25RT Engine Powered Articulating Boom is a versatile lift designed for rough terrain applications with excellent up, out, and over positioning capabilities and extensive outreach. The tight turning radius and zero tail swing allow the lift to perform unmatched maneuverability in hard to access work areas. A full time positive drive action system and an active oscillating axle, operate together based on the ground conditions to move the lift on the terrain without losing traction in order to complete the job in fast and efficient manner.

The working platform of the lift has self-leveling feature that maintains the platform level through the entire range of motion. A diesel engine like turbocharged Deutz, Perkins, and much more provides more power and increased performance at higher altitudes. A motion-shutoff and a proximity-sensing mechanism are arranged under the platform to protect sensitive surfaces from damage. The lift is well suited for travelling over irregular or bumpy ground. The Genie Z45/25RT Engine Powered Articulating Boom can be easily towed on another vehicle with the help of tow bar, steering float valve, and tow bar storage bracket.

[table]
S - 120, , , ,
Product, Power, Drive, Platform Height, Working Height
Boom Lift, Electric / Diesel, Self-propelled / Rough Terrain, 120 ft., 126 ft.
[/table]
The self-propelled, telescopic S-120 boom is easily configured to meet the needs of the construction industries. The standard platform measuring 8feet is made of hard steel. The Genie S-120 is the only one of its kind with two different platform options of 4feet and 5feet. The smooth and rigid S-120 Telescopic Boom that lifts 750lb can reach a working height of 126 feet with a horizontal stretch of 75 feet. The hydraulically operated platform, powered by biodegradable and fire-resistant hydraulic oil, is operated by fully proportional Hall Effect joy stick controls.

Complete safety and productivity is ensured with this telescopic booms descent and tilt alarm, drive enabled with two speed wheel motors. To monitor the engine functionality, engine status display is also provided next to the control. To achieve optimum power, all engines are emission compliant supported with auto-engine fault shutdown and 12V DC auxiliary power supply. The equipment has extendable axle with different diesel options. Balancing of the wheels is well maintained by rough terrain foam filled tires.

Back to top

Vertical Lifts

[table]
AWP - 20S, , , ,
Product, Power, Drive, Platform Height, Working Height
Vertical Lift, Electric, Self-propelled / Rough Terrain, 20.1 ft., 26 ft. 1 in.
[/table]
Genie, one of the largest lift designers in North America, has designed aerial work platforms that are easy to transport, use, and customize according to your needs. The new series of AWP-20S enclose a platform height of 20 feet 1 inch and working height of 26 feet 1 inch to suit a range of applications. With AC power of 85 V, 110 V, or 220 V, it ensures enhanced performance. The Genie AWP 20S also features a lift capacity of 350 lbs. with easy loading facilities for your convenience.

This boom comes with three different base options that are standard base, narrow base, and rough terrain base enabling you to choose the one that best suits your needs. It has other remarkable features such as dual activated up and down switch, tie down attachment points, and LED lights that confirm proper set up of the AWP. This boom also has tie down attachment points and overhead crane attachment points for better mobility and safety.

[table]
AWP - 36S, , , ,
Product, Power, Drive, Platform Height, Working Height
Vertical Lift, Electric, Self-propelled / Rough Terrain, 40.3 ft., 46 ft. 4 in.
[/table]
If you are looking for an accessible, lucrative, and a purposeful aerial work platform, then the Genie AWP- 40S is the accurate choice for your needs. It is designed for lifting a load of 300lbs with the 220 V, 110 V, 85 V AC or 12V DC power supply. The DC power supply comes with a useful automatic smart charging feature. Its platforms come in varied varieties for you to choose according to your requirements. It includes sliding mid-rail standard platform, gated narrow platform, and standard fiberglass platform.

The platform height of this boom is 40 feet 4 inches and is incorporated with platform locating laser light for better accessibility. It has a standard base width of 2 feet 5 inch to provide a spacious platform for you to work effortlessly. The wide forklift pockets and rear forklift pockets are provided in the AWP - 40S that enables for easy lower and upward movement usage. The accessories such as descent alarm package, operational warning light, and LED light guarantees maximum safety.

[table]
DPL - 25S, , , ,
Product, Power, Drive, Platform Height, Working Height
Vertical Lift, Electric, Self-propelled, 25.3 ft., 31 ft. 4 in.
[/table]
The Dual Personnel Lift 25S, manufactured by Genie, is a convenient working platform for one or two workers. A handle with steering capability and swivel lock casters that rotate 360 degree enable the lift through any confined space. Depending on the whether the lift needs to be used indoor or outdoor, the DPL can be operated either by AC (110 V or 220V/50-60 Hz) or DC (12V) power supply. The DPL 25S integrates a standard ground fault circuit interrupter (GFCI) electrical outlet for instant and easy operation.

Easy and secure transport of the Genie Dual Personnel Lift (DPL) - 25S is possible with its outrigger storage, forklift pockets, and tie-down points. Its winch attachment points are convenient for loading on roll-back trucks. The Dual Personnel Lift 25S includes additional accessories like tool tray, fluorescent tube caddy, platform-locating laser light, and operational warning light and descent alarm for better application.

[table]
DPL - 35S, , , ,
Product, Power, Drive, Platform Height, Working Height
Vertical Lift, Electric, Self-propelled, 34.8 ft., 40 ft. 10 in.
[/table]
The Genie Dual Personnel Lift 35S is a low cost and convenient working platform that can accommodate one or two workers and rise up to a height of 12.62 meters. With good steering handle and 4-position non-marking swivel lock casters, the DPL 35S can easily maneuver around in narrow paths. The lift integrates a standard ground fault circuit interrupter (GFCI) electrical outlet that prevents any mishaps during the lift operation.

Based on the need to use it indoors or outdoors, the lift can be operated either by AC (110 V or 220V/50-60 Hz) or DC (12V) power supply, which ensure clean and quiet operation. The outer trigger storage sockets, multidirectional forklift pockets, and sturdy tie-down attachment points permit easier transportation of the lift. Its winch attachment points winch the lift on and off on roll-back trucks in an easier manner. With user-friendly controls such as ground controls, dual activated platform controls, and auxiliary platform lowering, the lift allows the worker to descent in the event of a power failure.

[table]
DPL - 35S, , , ,
Product, Power, Drive, Platform Height, Working Height
Vertical Lift, Electric, Self-propelled, 24.5 ft., 30 ft. 5 in.
[/table]
If you are looking to work at heights, the Genie IWP 25S lets you set up platforms in seconds with excellent stability. This platform is designed to lift 350 pounds by means of AC power to the platform. The built-in level sensing is designed to check if the platform is level; all interlocks are displayed on the ground controls to confirm proper set-up. The auxiliary platform lowering mechanism enables the platform to be lowered automatically in case of power failure.

The Genie IWP - 25S has two models one with standard base and the other with wide base; these work platforms can also operate on a wide range of AC voltage specifications. The DC model comes with a smart charging system along with a battery indicator. With dual raise-lower switches, you can gain effective control over this machine from the ground. The design also comes with tie-down and overhead crane attachment points as accessories for work. The ground fault interrupt power receptacle provides for safe, convenient use of power tools.

Back to top

Scissor Lifts

[table]
GS - 1930, , , ,
Product, Power, Drive, Platform Height, Working Height
Scissor Lift, Electric, Self-propelled, 19 ft., 25 ft.
[/table]
The Genie GS 1930 has an attainable height of 25 feet with a base area width of 2 feet 5 inch. The platform slides an area of 39 inch that can hold a load of 250 pounds. This self-propelled scissor lift runs at 2.5 mph with 30% gradeability. The steel platform has high friction and is wired with railings for safety.

The graphic tablet functions from ground or base for enhanced performance. A 24V DC supply is connected to the platform of the Genie GS-1930. A 25 amp chargers when Battery Charge Indicator (BCI) signals a low level of battery power. The wheels do not scar the floor but rotate outward at a diameter of 10 feet 2 inch. The rear wheels are attached with many disc brakes while front end support dual drive. During the raise, speed is controlled by drive interlock system. The GS-1930 is technological competitive by implementing noise free and sensor alarm solutions.

[table]
GS - 2032, , , ,
Product, Power, Drive, Platform Height, Working Height
Scissor Lift, Electric, Self-propelled, 20 ft., 26 ft.
[/table]
The Genie GS - 2032 Lift comes with a lift capacity of 800 lbs. to suit a wide variety of applications. With zero inside turning radius the lift offers tremendous maneuver ability in tight spaces like congested construction sites, elevators, and narrow aisles. Orange flashing lights are arranged to signal when the lift moves to prevent the workers from descend. Folding rails with half-height swing gate also provides easy access through doorways, elevators, and height restricted areas.

The formation of scuff or debris on the floors is prevented using solid non-marking tires. The lift can be operated quietly and conveniently in sound sensitive environments due its low noise operation. It is very compact in size to easily pass through single doors and extends up to a working height of up to 8.10 m. The Genie Self-Propelled Electric Scissor Lift - GS - 2032 includes additional accessories like pothole guards, maintenance free batteries, universal smart charger, fixed rail with chain entry gate, and platform swing gate.

[table]
GS - 3246, , , ,
Product, Power, Drive, Platform Height, Working Height
Scissor Lift, Electric, Self-propelled, 32 ft., 32 ft.
[/table]
The Genie GS - 2032 Lift comes with a lift capacity of 800 lbs. to suit a wide variety of applications. With zero inside turning radius the lift offers tremendous maneuver ability in tight spaces like congested construction sites, elevators, and narrow aisles. Orange flashing lights are arranged to signal when the lift moves to prevent the workers from descend. Folding rails with half-height swing gate also provides easy access through doorways, elevators, and height restricted areas.

The formation of scuff or debris on the floors is prevented using solid non-marking tires. The lift can be operated quietly and conveniently in sound sensitive environments due its low noise operation. It is very compact in size to easily pass through single doors and extends up to a working height of up to 8.10 m. The Genie Self-Propelled Electric Scissor Lift - GS - 2032 includes additional accessories like pothole guards, maintenance free batteries, universal smart charger, fixed rail with chain entry gate, and platform swing gate.

[table]
GS – 2668 RT, , , ,
Product, Power, Drive, Platform Height, Working Height
Scissor Lift, Electric / Diesel / Gas, Self-propelled/ Rough Terrain, 26 ft., 32 ft.
[/table]
The GS - 2668 RT lift is an innovative version of Genies scissor lifts that is equipped with improved four wheel drive traction control for delivering optimal rough terrain performance. It is specially designed to access through the toughest outdoor sites and to boost productivity with the industry’s most advanced aerial equipment by handling higher volume of workers and tools. The lift can reach about 9.92 m to deliver the work faster and more easily.

A multi - slide out extension deck is arranged on the front of the platform to offer 66 square feet of space for the workers and tools in order to increase the efficiency of work. Engine components can be easily accessed using swing-out engine trays for superior serviceability. Electrically powered operating tools can be utilized by the workers over platform by supplying power to the platform using 2000 watt AC generator. The lift also includes hydraulic outriggers for automatic leveling of the lift on uneven ground condition before raising the platform.

[table]
GS - 3384 RT, , , ,
Product, Power, Drive, Platform Height, Working Height
Scissor Lift, Electric / Diesel / Gas, Self-propelled/ Rough Terrain, 33 ft., 39 ft.
[/table]
The Rough Terrain Scissor Lift - GS - 3384 is an ever-expanding line of genie production, which is suitable for big outdoor jobs where platform workspace is critical. The lift is featured to occupy greater capacity of workers, materials, and tools for offering productivity by enhancing speed and gradeability in demanding outdoor worksites. The lift is equipped with a four wheel drive with positive traction control providing traction whenever it is needed.

Heavy duty fold-down guardrails and a removable rear platform railing permits increased accessibility for loading and unloading the lift in trucks, containers, and in other situations with limited overhead space. Slide or pull out engine trays allow easy access to engine components without the need to reach around obstacles inside the machine for convenient service. An oscillating axle automatically senses the terrain and adjusts the axle position based on the ground conditions for maximum stability. A multi-position slide-out extension deck, which is a standard part in all rough terrain models, is arranged on the front of the platform for added workspace.

Back to top